Connecting To A Television - Impecca DVHP9112 Manual Del Usuario

CONNECTING TO A TELEVISION

When connecting this unit and other components, be sure that all devices are turned off.
Audio/Video cables are connected according to different color identification and should be fitted firmly
into the appropriate jacks.
Basic TV Connection: Connecting to a TV using the standard Audio/Video cable
You can connect the DVD
player to a standard television
using the player's Audio and
Video jacks.
1. Connect the supplied
Audio/Video cable using the
red and white cables to the
Audio jacks on the rear of the
DVD player and to the Audio
Inputs on your television.
2. Connect the video cable
(yellow) to the Video jack on
the rear of the player to the
Video Input on your television.
3. Set your TV to its
appropriate Video input.
Connection to TV using YUV Output Jacks
(cable NOT included):
1. Connect a YUV cable (not
included) to the Y, Pb, Pr jacks on
the DVD player and to the Y, Pb/Cb,
Pr/Cr input jacks on your television.
2. Connect the supplied Audio/Video
cable using the red and white cables
to the Audio jacks on the rear of the
DVD player and to the Audio Inputs
on your television.
3. Set the Component setting (on
the video settings page) to YUV
All manuals and user guides at all-guides.com
.
- 9 -