Basic Dvd Player Operation - Impecca DVHP9112 Manual Del Usuario

BASIC DVD PLAYER OPERATION

Before You Begin
Turn on your TV and select the appropriate video input settings to correspond to the input used when
connecting to the DVD player. Refer to the "System Connections" section of this manual.
If you have connected the player to an audio system (stereo or amplifier) turn on your audio system
and select the appropriate audio input settings to correspond to the input used when connecting to
the DVD player.
Note: As TV and/or audio systems vary, please refer to your TV or Audio system user's manual.
Play
1. Press the POWER button on the DVD player or press the Power/Standy button on the DVD
remote control.
2. Press OPEN/CLOSE button (on the DVD player or remote control) to open the disc tray.
3. Hold the edge of the disc and place it in the tray with the label side up.
4. Press OPEN/CLOSE button (on the DVD player or remote control) again to close the disc
tray.
 The DVD player starts playback or opens the DVD disc menu automatically. Use the
arrows and the enter button to navigate the DVD's menu screen.
If the DVD does not automatically begin playing, press PLAY (on the DVD player or remote control).
Note: The auto-load sequence of each DVD, CD, VCD disc may vary according to format and/or
the way the disc was authored. Some DVDs will auto-play a series of previews, copyright notices,
or advertisements before loading the Menu screen. Certain buttons on the remote control, such as
the MENU, TITLE, F.RWD, F.FWD, PREV, NEXT, and GOTO buttons, may be automatically
disabled until the auto-load sequence is completed.
Pause
 To pause, press the PLAY/PAUSE button once during playback.
 To resume , press the PLAY/PAUSE button again.
All manuals and user guides at all-guides.com
- 10 -