Impecca DVHP9112 Manual Del Usuario página 16

Video Setup Page
This page allows you to configure the Video output settings.
Component
If you are connecting the composite video output on the DVD player to the composite video
input on your TV, choose the CVBS setting. Otherwise, select YUV.
TV Mode
Use this feature to select P-Scan or Interlace.
Quality
Select Quality to modify additional settings as shown:
Sharpness
Use this feature to adjust the sharpness – High, Medium, Low.
Brightness
Use this feature to adjust the quality of your video display. Select Brightness and then use the
Left/Right Direction buttons to adjust the Brightness. Press the Enter button to confirm and
return to the previous menu.
Contrast
Use this feature to adjust the quality of your video display. Select Contrast and then use the
Left/Right Direction buttons to adjust the Contrast. Press the Enter button to confirm and
return to the previous menu.
Gamma
Use this feature to adjust the Gamma.
Hue
Use this feature to adjust the quality of your video display. Select Hue and then use the
Left/Right Direction buttons to adjust the Hue. Press the Enter button to confirm and return
to the previous menu.
Saturation
Use this feature to adjust the quality of your video display. Select Saturation and then use the
Left/Right Direction buttons to adjust the Saturation. Press the Enter button to confirm and
return to the previous menu.
All manuals and user guides at all-guides.com
- 15 -