Operation; Operational Safety Instructions; Switch On; Backwash Valves - Behncke DRESDEN3 Manual De Instrucciones

6

Operation

6.1 Operational safety instructions

Basics

6.2 Switch on

In the private swimming pool sector, filter pumps should run for approx. 10 hours every day.
The pool water must be circulated roughly twice within this time.
You can distribute the running time throughout the day.

6.3 Backwash valves

For information on setting up and installing the backwash valve, please refer to the operating instructions
of your chosen make.

6.3.1 6-way valve

CAUTION
Risk of injury due to improper operation!
Improper operation may lead to severe injuries or material damage.
•
Operate in accordance with the information in this instruction manual.
•
The instructions must be read and understood.
DANGER
• The filter pump may be damaged.
• Always switch the filter pump off before operating the valve lever.
• Never switch the pump on in the "Closed" valve position.
NOTE
To select a different function, always push the backwash valve operating
handle down first, and then turn it to the desired position.
CAUTION
There is a jamming risk when operating the switch lever.
Do not reach into the opening below the switch lever.
Filter tank DRESDEN³ / Operation
17