Nosiboo Pro2 Manual Del Usuario página 10

3. Attach the Colibri head to the device.
a) Attach one end of the connecting tube to the Colibri head.
b) Attach the free end of the connecting tube to the device
housing.
4. Attach one end of the power cord to the device.
Plug the other end of the power cord into a 100-240 V AC outlet.
5. The device is ready for use.
WARNING
The device should be connected to or dis-
connected from the power network only if the
control button is in OFF position (the device is
switched off).
DO!
Be sure to use the device only with a 100-240 V
AC. Failure to do so may cause electric shock
or fire.
!
CAUTION
Clean the parts of the Colibri head before every
use.
DO!
Make sure that all parts are clean and dried
thoroughly before use.
Do not use the Colibri head and the device
without the collared tube.
DON'T!
!