5. and 6 in the OFF position: disables the automatic closing function in
"pedestrian" mode (default)
6. on the ON position and 6 on the OFF position: in the "pedestrian"
mode, when the gate is completely open, it will close automatically after
5 seconds.
7. on the OFF position and 6 on the ON position: in the "pedestrian" mode,
when the gate is completely open, it will close automatically after 10
seconds.
8. on the ON position and 6 on the ON position: in "pedestrian" mode,
when the gate is fully open, it will close automatically after 30 seconds.
Notes:
•
Buttons 2 and 4 (depending on how the remote control was paired)
operate the gate in "pedestrian" mode.
•
If the engine runs and the 2 or 4 button on the remote control is pressed,
the engine will stop automatically.
•
If you press button 2 or 4 on the remote control to open the gate, it will
close after the programmed time (5, 10 or 30 seconds) or will remain
open (if automatic closing has been deactivated) or press button 2 or 4
again to close the gate immediately.
7. OFF position: deactivates the condominium mode
ON position: activates the condominium mode
Note: In condominium mode, when the gate is open, if you press the buttons
on the remote control or other connected access terminal (access button or
access keypad), they will not work until the gate is fully open. When the gate
is closed, if you press the buttons on the remote control or other connected
access terminal, the gate will stop and reopen completely.
13.4 Capacitors for starting the engine
The capacitors are connected to the Mainboard. Make sure the capacitor
interface is secure. Please refer to the Mainboard configuration in the image
on the previous page.
User manual
10