Operation; Technical Information; Install The Battery; Turn On The Hand Controller - Rubbermaid 2173661 Guía De Operación

EN
5

OPERATION

5.1

TECHNICAL INFORMATION

Do not exceed maximum load capacity
SKU # DESCRIPTION
2173663 PLATFORM TRUCK
MED 24 × 48
POWER KIT
2173661 PLATFORM TRUCK
LARGE 30 × 60
POWER KIT
2173519 POWERED ROTO
TILT TRUCK
0.5 CU YD
2173662 POWERED ROTO
TILT TRUCK
1.0 CU YD
2173556 HK CART POWER
KIT FOR 6189/6190
5.2

INSTALL THE BATTERY

There are two battery slots in the battery compartment. The
left-hand battery slot controls the battery power. The right-hand
slot is unpowered spare battery storage that can be used to
extend the work cycle.
To install a battery:
1. Open the battery door (Platform Truck/Tilt Truck).
2. Align the grooves on the battery with the ribs in the
left-hand battery slot.
3. Push the battery into the battery slot until the battery locks
in place. The battery contacts will engage, and the latch will
drop into place.
4. Close the battery cover.
Battery Cover
Battery Latch
Working Battery
Power Contacts
Battery Catch
Power Contacts
TRUCK/
BATTERY CHARGER CART +
SKU # SKU # POWER KIT
WEIGHT
2173664 2173520 100.5 lbs
2173664 2173520 133.7 lbs
2173664 2173520 93.0 lbs
2173664 2173520 132.0 lbs
2173664 2173520 135.1 lbs
Spare Battery
System Controller
English
5.3

TURN ON THE HAND CONTROLLER

The safety key functions as an on/off switch. The safety key is
also the emergency stop switch. In an emergency, pulling the
safety key will cut power to the motor and the machine will
coast to a stop.
MAX To power on the system:
LOAD
1. Make sure there is a charged battery in the battery
RATING
compartment's left-hand slot.
1,000 lbs
2. Insert the safety key into the hand controller's system and
the motor energize.
1,000 lbs
In case of emergency:
Pull the safety key.
Your cart or truck will de-energize and roll to a stop.
850 lbs
1,000 lbs
350 lbs
Safety Key
5.4

ADJUST THE HAND CONTROLLER

You can adjust the speed and direction of the motor. Use the
knob at the top left of the hand controller to adjust the speed of
the hand controller. Use the switch at the right to adjust the
motor to forward or reverse.
Adjust the speed:
1. Turn the knob to the left to slow the motor.
2. Turn the knob to the right to speed up the motor.
Set the motor to forward or reverse.
1. Press "F" to set the motor to forward travel.
2. Press "R" to set the motor to reverse travel.
4
Safety Key Slot