Troubleshooting Guide - Altrad BELLE BULLDOG & HPP Manual Del Operador

Problem
Engine stops or will not
start.
Hydraulic Oil Pressure
low.
Accessory Tool running
hot or loose.
Engine speed remains
at idle when tools are
Engine speed remains
Bypass.

Troubleshooting Guide

Cause
Hydraulic pump seized.
Pump worn or damaged.
Hydraulic pump worn or damaged.
Hydraulic oil contaminated.
Throttle lever incorrectly set at low speed.
Remedy
correct grade.
Tighten or renew as necessary
Drain oil tank and transmission hoses and replenish with
21
GB