ErgoAV ERTSM1-01B Manual De Instrucciones página 12

Step 5-3
Insert the safety locks [K1] into the upward facing hooks at the
midway to lower part of the TV bracket. Please note this is where the lower
part of the TV bracket meets the TV plate. Then tighten the bolts of the safety
lock [K1] until the bolts touch the TV plate.
K1
K1
Manage the wires
Note: Make sure the bolt is tighten
Phillips Screwdriver
behind the TV mounting plate.
(Not lncluded)
Supplied Hardware for Step 6A
For wooden table furniture/wood stud installation.
Screw M5X60mm Screw M5X25mm M5 Washer(BK)
Z1 Z2 Z3
x2 x4 x2
12