ErgoAV ERTSM1-01B Manual De Instrucciones página 9

Supplied Parts and Hardware for Step 3
This bolt is shown in actual size.
(S) x4 M6x40mm Bolt
(Q) x4
M6 Nut
Step 3 Connect the TV Plate [M] to Support Pillar [P]
Note: Before attaching the TV Mounting
Plate to the pillar, measure the distance
from the upper hook on the TV Bracket
to the bottom of the TV. Then refer to
chart below for the recommended
mounting location. To add an additional
2" of space between your TV and the
base, use the lower hooks located on
the TV Brackets. We always recom-
mend using the lowest possible attach-
ment location for the safest assembly.
Distance from the hooks on the TV
Brackets to the bottom of the TV
5/32in (4mm)
Allen Key
13 1/4" to 15 1/4"
11 1/4" to 13 1/4"
Less Than 11 1/4"
(V) x1
Recommended TV Mounting
Plate Location
Location #1
Location #2
Location #3
09
(X) x2
Safety Strap
(M) x1
TV Plate
(V) x1
7/16 in (11mm)
Wrench
Mounting Location #1
Mounting Location #2
Mounting Location #3