fadini COMBI 787 Manual De Instrucciones página 11

COMBI 787
FITTING COMBI 787's INSIDE THE FOUNDATION BOXES
2
Put the Combi 787's inside the foundation boxes and fix them by the 4 stud bolts: no difference between Combi 787
right-hand or left-hand.
Tighten the 4 hexagonal studs very hard.
Combi 787
LEFT GATE
FITTING THE OPERATING ARMS ONTO THE SQUARE SHAFT
3
NOTE WELL: FIT THE OPERATING ARM AND MAKE SURE THE RESPECTIVE NOTCHES ON THE SQUARE
! SHAFT AND OPERATING ARM ARE PERFECTLY ALIGNED:
- COMBI 787 INSTALLED ON THE RIGHT TO MATCH THE NOTCH MARKED DX (right)
- COMBI 787 INSTALLED ON THE LEFT TO MATCH THE NOTCH MARKED SX (left)
COMBI 787
ON THE LEFT GATE
Rotate the shaft about 30-40° in the direction opposite to the opening of the gate (towards the outside), manually with Combi 787
released, or electrically by providing a temporary power connection setup.
30 - 40°
LEFT GATE
Oil-hydraulic underground operator
for swinging gates
Hydraulic release: turn the
lever for manual operations,
then lock again.
11
Combi 787
RIGHT GATE
COMBI 787
ON THE RIGHT GATE
30 - 40°
RIGHT GATE