TP-Link tapo P125 Guia De Inicio Rapido

English
Getting Started
Quick Start Guide
1. Get the Tapo app from the App
Mini Smart Wi-Fi Plug
Store or Google Play.
2. Follow the instructions in the Tapo
Tapo
app to complete the setup.
App
© 2022 TP-Link 7106509839 REV1.1.1
Failed to Add to Home?
Press and hold the Power button for 10 seconds to factory
reset the plug, and restart your phone.
Refer to the FAQ for detailed instructions.
https://www.tp-link.com/support/faq/3390/
Español (Latinoamérica)
Primeros pasos ¿Error al agregar a Inicio?
1. Obtenga la aplicación Tapo en App Mantenga presionado el botón de encendido durante 10 segundos
Store o Google Play. para restablecer de fábrica el contacto y reinicie su teléfono.
2. Siga las instrucciones de la
Consulte las preguntas frecuentes para obtener
aplicación Tapo para completar la
instrucciones detalladas.
configuración.
https://www.tp-link.com/support/faq/3390/
Supported Load Types for US Version:
100-125V, 50/60Hz, 15A, General use/Resistive
100-125V, 50/60Hz, 1/6HP, (4.4FLA/26.4LRA), Motor load
100-125V, 50/60Hz, 8A, Incandescent
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference. (2) This device must accept
any interference received, including interference that may cause undesired operation.
Please keep this instruction manual.
This is a portable direct plug-in device. Plug the device into a suitable outlet. This device
is intended for indoor use only. Keep the device away from heat sources and enclosed
spaces with poor ventilation.
Purpose of control: this is operating control.
Operating control, Type 1.B action
Impulse voltage: 1500V Pollution degree 2 NEMA Type 1 Enclosure
For technical support, the user guide and other information, visit
?
https://www.tapo.com/support/.