EZiclean Aqua Xpert animal S450 Manual De Usuario página 24

To clean the main brush, follow these instructions:
1. Open the main brush 2. Remove the main brush 3. Use the cleaning brush
the main brush to remove dirt.
To clean the side brushes, run them under water or clean them with a cloth
To clean the sensors, follow these instructions:
The sensors on the charging base, the sensors on the robot and the bumper contain sensitive electronics.
Use a dry cloth to clean them and be careful not to get them wet as this could damage them.
1. Clean the load cells. 2. Clean the robot's 3. Clean the center wheel.
load cells. sensors.
- If you are not going to use the product for a long time, fully charge it before storing it.
- Turn off the unit and continue charging every 3 months to prevent the battery from being completely discharged.
- If the battery is too discharged or not used for a long time, the product may not be able to be recharged. Contact our
company for service. Do not disassemble the product yourself.