Turn the freezer compartment door 180°, put the mounting cap on the upper axle and then fit the axle
·
into the hole at the top of the appliance.
Keep the freezer compartment door closed. Put the mounting clamp on the lower axle and put enough
·
pressure so that there is no gap between the mounting clamp and the housing of the appliance, then
fix the screw of the mounting clamp.
·
You can use the supplied cover caps to cover the original screw holes.
USE
CONTROL PANEL
Display
1.
Temperature of fridge: 8°C
2.
Temperature of fridge: 6°C
3.
Temperature of fridge: 4°C
4.
Temperature of fridge: 2°C
5.
Super-freezing
Touch screen buttons
A. Temperature of fridge / Super-freezing
TEMPERATURE CONTROLS
The temperature of the fridge can be set between 2 and 8°C. Under normal conditions, it is best to
·
select 4°C. Press the middle of the "Temp./3sec" button (temperature fridge) and continue to press
until the desired temperature is displayed.
The operating time and temperature is influenced by the location of the fridge, the number of times
·
the door is opened and the temperature of the room the fridge is in.
Super-freezing
Select this function if the standard temperature does not cool sufficiently. For example: with
·
extremely hot weather, if the doors are opened often, with a high environmental temperature, if a
large quantity of uncooled/unfrozen food is placed in the appliance, etc.
52
DO91122