How To Use; On/Off Button - EnviroBoss Z400 Manual Del Usuario

HOW TO USE

On/off Button

Tap to turn the air purifier on/off.
Sensor Switch Button
Tap repeatedly to change the currently displayed pollutant.
SENSOR
Note:
SWITCH
a. When the air purifier is switched on, the air quality sensor needs around 20 seconds to measure
the ambient air quality and generate the display value.
b. The displayed pollutant cycles through PM1, TVOC, PM10, PM2.5.
c. PM1/PM10/PM2.5 shows particle concentration of particles with diameters not larger than 1.0/10/2.5 microns.
Auto Button
Tap to turn Auto Mode on/off.
AUTO
Note: Auto mode uses a sensor inside the air purifier to adjust the fan speed automatically based on your indoor air quality.
Wi-Fi Button
Press and hold to configure the air purifier.
Wi-Fi
Note: Please see the App instructions for more information.
Fan Speed Button
Tap to change the fan speed.
SPEED
Note: The fan speed cycles through 1, 2, 3, 4, 5.
Timer Button
Tap repeatedly to set a timer for 1, 2, 4, or 8 hours.
TIMER
Sleep Button
SLEEP Tap to turn Sleep Mode on/off.
Note: All light will be off on Sleep Mode except
Filter/Lock Button
FILTER
Filter Reset:
/LOCK
Press and hold for 5 seconds to reset the filter lifetime counter.
Note:
Child Lock:
Tap to lock/unlock all functional buttons.
will flash when it is time to change the filter.
3
dims.