EN
ILS Mode
ILS (Integrated Lighting System) provides 4 modes that synchronize with the GigBAR MOVE+ILS: Modes 1 and 3
synchronize with side 1 of the GigBAR MOVE+ILS, whereas modes 2 and 4 synchronize with side 2 of the GigBAR
MOVE+ILS. When linked, effects will sync with the most similar effect on the selected side of the GigBAR MOVE+ILS:
Kinta effects will sync with one of the kintas, moving heads will sync with one of the moving heads, and wash effects will
sync with one of the pars. Laser effects will sync with the laser, and strobe effects will sync with the strobe effects
regardless of ILS mode.
This product will synchronize with the par effect on the selected side of the GigBAR MOVE+ILS.
To set the SlimPAR H6 ILS to respond to an ILS signal:
1. Press <MENU> repeatedly until iLS_ shows on the display.
2. Use <UP> or <DOWN> to select from iLS1 (side 1), iLS2 (side 2), iLS3 (side 1), or iLS4 (side 2).
3. Press <ENTER>
DMX Values
6-Ch 8-Ch 12-Ch Function
–
1
1
Dimmer
1
2
2
Red
2
3
3
Green
3
4
4
Blue
4
5
5
Amber
5
6
6
White
6
7
7
Ultraviolet
–
8
8
Strobe
–
–
9
Color macros
–
–
10
Program
Program speed
(when Ch. 10 is 011 200) 000 255 Program speed, slow to fast
–
–
11
Sound sensitivity
(when Ch. 10 is 201 255)
–
–
12
Dimmer speed
5
QUICK REFERENCE GUIDE
Value
Percent/Setting
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 010 No function
011 255 Strobe, slow to fast
000 015 No function
016 255 Color macros
000 010 No function
011 050 Automatic 6-color snap
051 100 Automatic 6-color fade
100 150 Automatic 34-color snap
151 200 Automatic 34-color fade
201 225 Sound-active 6-color snap
226 255 Sound-active 34-color snap
000 010 Sound sensitivity off
011 255 Sound sensitivity, low to high
000 051 Dimmer speed set from display menu
052 101 Dimmer speed mode off
102 152 Dimmer speed mode 1 (fast)
153 203 Dimmer speed mode 2 (medium)
204 255 Dimmer speed mode 3 (slow)
SlimPAR H6 ILS QRG Rev. 3