Led Status; Maintenance; General Exterior Maintenance - Ford Pro Guia De Instalacion

LED Status

Maintenance

While there is no maintenance for the internal works of the unit, the exterior does require some basic, common sense
maintenance. The following maintenance can be performed by the owner/user. All other service must be conducted by
qualified personnel. If there is any damage to the charger, contact Ford. General exterior maintenance is recommended
to be performed every six months depending on the environment. In harsh environments, maintenance should be
performed more often.

General exterior maintenance

Regular cleaning is recommended to avoid accumulation of debris/dust/dirt on or around the unit. Wipe surfaces with a
soft cloth dampened with water, or for harder to removed marks, use an alcohol based cleaner. Do not spray with high-
pressure cleaning devices or use abrasive chemicals. Check for cuts, cracks, damage, and debris. If debris is present,
remove it. If you find damage, contact Ford. Check for damage and corrosion. If present, contact Ford. Check the HMI for
damage/signs of faded color that is clearly visible. Ensure there is no debris or damage inside or around the cable, cable
holder and connector/plug. If present, remove debris and/or notify the Ford of any damage. Check the connector/plug
pins for any signs of corrosion and contact Ford, if there is any damage to the pins. Check for Snow/Ice buildup around
the unit and clear the area around the unit. This should be checked daily in areas with high snowfall.
Status Explanation
Off The station is not powered by grid or battery backup
Dim blue The station is grid powered
Bright blue The station is grid powered, plugged in and ready to charge
Pulsing blue The station is plugged and and charging
Dim green The station is powered by battery backup and not plugged in
Bright green The station is powered by battery backup, plugged in and ready to discharge
Pulse green The station is powered by battery backup, plugged in and discharging
Pulse Green/Pulse Blue The station is powered and locked. Station will not charge or discharge
Solid red The station has experienced a non-recoverable fault
Solid amber The station has a fault and trouble shooting is required
Pulse Red The station has experienced a ground fault
Solid Amber/Pulse Blue The station is charging at a reduced rate
Pulsing White Setup mode Wifi/Bluetooth
Solid White Station Reset
P a g e | 18