Asist AE6V150DN-1 Instrucciones De Uso página 29

ment, but always so that the entire contact surface of
the attachment touches the heating element.
3. Plug the power cable into the power source. Turn
the switch, or both switches at the same time, to the
"I" position. Lighting the switch means the device is
turned on.
The device can work in two power levels (750W or
1500W). After turning on one switch (any), the device
works with an input of 750W. The heating time from
room temperature to maximum temperature (300°C)
is approx. 6 minutes. After turning on both switches
/1500W/, approx. 3.5 minutes.
approximate values and heating times:
-
Time
tions
heating /
/diameter
min./
mm/
20 5
25 7
32 8
40 12
50 18
63 24
4. Set the desired temperature with the rotary control
(5). The lighting of the indicator light (3) means that
heating to the set temperature is in progress. When
the light goes out, it means that the heating element
is heated to the temperature set on the controller.
Note: Adjust the temperature according to the pipe
manufacturer's information.
5. Prepared pipes or put the pipe and coupling
into the attachment and let it heat up. Then quickly
remove the heated tubes from the attachment and
quickly insert one into the other.
Do not twist the tubes and let them cool.
nect the power cord from the electrical outlet.
Allow the device to cool completely before storing.
CLEANING AND MAINTENANCE
! Before cleaning and maintenance, always pull the
power cord of the tool from the socket.
It is forbidden to use metal objects to clean the fusing
surfaces of the attachments in order to avoid dam-
Depth Time
melting / cooling /
mm/ min./
14 3
16 3
20 4
21 4
22,5 5
24 6
-
a wooden spatula or a cloth made of non-synthetic
material. Do not use any solvents! Make sure that
no liquids get into the device: e.g. when cleaning or
using it outdoors. Liquid ingress into the device may
damage it.
Storage when not in use for a long time
Do not store the tool in a place where the temperature
is high.
If possible, store tools in a place with constant tem-
perature and humidity.
Input voltage 220-240 V
Input frequency 50 Hz
Max. power consumption 750/1500 W
Number of power stages 2
Max. temperature 0-300°C
Weight 1.35 kg
Protection class II.
ENVIRONMENTAL PROTECTIONWASTE MANAGE-
MENT
Power tools, accessories and packaging should be
provided for recycling and not to harm the environ-
ment.
Do not dispose of power tools into household waste!
According to Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and
electronic equipment (WEEE) and its approximation
over at the point of purchase of similar equipment, or
in available collection points designated for collection
and disposal of power tools. Such disposed power
tools will be collected, disassembled and delivered for
environment-friendly recycling.
WARRANTY
conditions.
Date of Manufacture
The date of manufacture is incorporated into the se-
rial number stated in the product nameplate.
The serial number has the format of ORD-YY- -SERI,
where ORD is the number of purchase order, YY
stands for the year of manufacture,
of manufacture and SERI means the serial product
number.
29
is the month