DeLOCK 61886 Manual Del Usuario página 2

English
Description
This USB Type-A to serial adapter by Delock provides two RS-232 DB9 interfaces
for printers, measuring instruments, controllers, IoT devices etc.
Specification
• Connectors:
1 x USB 2.0 Type-A male >
2 x serial RS-232 DB9 male
• Chipset: FTDI FT232
• Data transfer rate up to 460.8 Kbps
• Supports: UHCI / OHCI / EHCI
• Serial connector with screw
• Supports remote wake-up and power management
• Cable length incl. connectors: ca. 1.5 m
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 2.6.x, Mac ex OS 10.9
• PC or laptop with a free USB Type-A port
Package content
• USB 2.0 to 2 x serial adapter
• Driver CD
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Driver Installation
1.
Switch on your computer.
2. Put the driver CD in the CD ROM drive.
3. The CD will start automatically. If not please follow step 4.
4. Open Windows Explorer, select: CD-drive\Autorun.exe.
5. Connect the adapter to an available USB port of your computer.
6.
The adapter will now be fully installed.
7.
Click on "Close".
8. You can now start to use the device.
-2-