Symbols; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Daewoo DALCS18-1 Manual Del Usuario

ENGLISH

4. SYMBOLS

The following symbols are used in this manual and/or on the circular saw.

5. GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to following the warnings and
instructions may result in an electric shock, fire andlor serious injury.
Save all warnings and instructions for future reference!
The term "power tool" in the warnings refers to your mains-operated (corded) power tool ar
battery-operated (cordless) power tool.

5.1 Work area safety

a) Keep work area clean and well lit. Cluttered ar dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust of fumes.
e) Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.

5.2 Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adap-
ter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets wil1 reduce
the risk of an electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed ar grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool wil1 increase the
risk of an electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged ar entangled cords increase
4