Mx Onda MX-PG2203N Manual De Usuario E Instalacion página 30

Characteristics of the different types of gas
Burner
size
Auxiliar
(Small)
semi fast
(Medium)
Fast
(large)
CHANGING THE INJECTORS
To change the injectors, proceed as follows:
1. Cut off or shut off the gas supply and unplug the gas hob from the electrical
outlet.
2. Use a hex socket wrench of the appropriate stock to the injector head
(Figure 1).
3. Remove the covers, as well as the burners of the four cooking zones to
access the injectors (Figure 2).
4. Remove the injectors by turning the key counterclockwise. To insert the
injectors, do so with great care so as not to damage the threads and do not
tighten them with too much force as they could break (Figure 3).
Warning: We recommend that this process be carried out by an authorized
installer, or by qualified personnel and/or authorized technicians.
Presure
Gas type
mbar
Natural
20-25
G20/25
Butane
28-37
G30
Natural
20-25
G20/25
Butane
28-37
G30
Natural
20-25
G20/25
Butane
28-37
G30
Diámeter Power
of injector
0.72
0.50
0.97
0.65
1.40
0.96
14
Gas flow
kW
0,95 0,96 m³/h
0,95 69 g/h
1,7 0,162 m³/h
1,7 124 g/h
2,9
0,333 m³/h
2,9 254 g/h