Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

TROUBLESHOOTING

Repairs to the electrical system may only be carried out by a qualified
electrician, and local regulations must be observed. If in doubt, contact the
manufacturer, customer service or an authorised specialist company.
Disconnect all power connections before opening the appliance.
Problem
The light turns on but
the engine does not run.
The light is off and the
engine does not run.
The housing vibrates.
The air is not extracted
properly.
Potential cause
The ventilation is
blocked.
The engine is damaged.
The lamp is broken.
The plug is loose.
The rotor blade of the
fan is damaged.
The motor is not firmly
seated.
The appliance has not
been hung properly on
the bracket.
The distance between
the cooker and the
extractor bonnet is too
far.
Solution
Switch off the appliance
and have it repaired by
qualified personnel.
Replace the bulb.
Plug the power plug
securely into the wall
socket.
Switch off the appliance
and have it repaired by
qualified personnel.
Remove the cooker
bonnet and make sure
that the bracket is in the
correct position.
Reduce the distance to
65-75 cm.
EN
45

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Alinea 90 smart10041171100411721004117310041174

Tabla de contenido