NuWave Brio 14Q Manual Del Propietário página 11

INSTRUCTIONS
• Press TIME. Press the up or down arrows to adjust the sear 2
(searing) time up to 5 min. (00:05).
3. Press START/PAUSE to begin cooking.
• Once regular stage cooking cycle is complete, the unit will
beep once and automatically go into Sear 2 cooking.
4. When the Brio is finished cooking your food, End will be
displayed and the unit will beep three times.
WARM
Warm can be used as an independent function to heat up your food.
1. Press and hold down WARM
for 2 seconds. The Brio will
automatically begin the
Warm function.
2. Press START/PAUSE. When
the warming time is finished,
End will be displayed and the
unit will beep three times.
3. To adjust the time or temperature, press either TIME or TEMP and
the up or down arrows.
Using Warm after cooking ends to keep your food warm in the Brio:
1. Press WARM. Use the up or down arrows to adjust the
warming temperature.
2. Press TIME. Use the up or down arrows to adjust the
warming time.
3. Press START/PAUSE to start cooking. The Brio will cook the
regular stage cooking cycle then will go into Warm at the set
temperature and time.
Notes:
• Warm temperature can be adjusted up to 200°F (200F).
• After cooking ends, Warm can then be set to keep your food warm.
Time and temperature for Warm is adjustable.
• Warm can be set immediately after adjusting regular cooking times
and temperatures, before the Brio cooks your food.
• To cancel Warm function at any time press WARM. Warm function
will end and warm will no longer be displayed.
• Warm can be used with the Program function option as well.
Press PROGRAM and then press WARM and adjust warming
temperature and time.
20 20
instructions
:
0 1 00
1800
PROGRAM
Program function represents Memory Entry, the storage of frequently
used cooking sequences, and Memory Recall, the retrieval of cooking
sequences for recipes.
Memory Recall
1. Press PROGRAM. Press the
up or down arrows to choose
the program number to recall.
• Numbers 1-100 are
preset programs.
• Numbers 101-200 are your
created unique
programs (recipes).
2. Once your program number is chosen, press START/PAUSE to
begin cooking. Temperature and time can be adjusted, if desired.
The Brio will cook at the programmed temperatures and times.
Notes:
• Refer to 100 Presets in the Quickstart Guide sheet for
preprogrammed recipes 1-100.
• Preset temperatures and times for program recipes 1-100 can
be adjusted. Adjusted temps and times will not be saved when a
program number (1-100) is recalled once again.
Storing Recipe Before Cooking:
1. Press ON/OFF. Enter your cooking functions including
temperatures and times for recipe.
2. Press PROGRAM. Press the
up and down arrows to choose
number to save your program
recipe to (101-200 only).
3. Press PROGRAM again to store
and save the program recipe to
the chosen program number.
• Program recipe is now stored and available for future recall.
4. Press START/PAUSE to begin cooking your set program (recipe).
Storing Recipe During Cooking:
1. Press ON/OFF. Enter your cooking functions including
temperatures and times for recipe.
2. Press START/PAUSE to begin cooking.
1
1800
1 0 1
1800
21 21
nuwavenow.com nuwavenow.com