Instructions - NuWave Brio 14Q Manual Del Propietário

INSTRUCTIONS

Getting Started
1. Press ON/OFF to turn your Brio
on and off.
• Temperature can be
adjusted by pressing the Up
or Down arrows.
2. To adjust the cooking time,
press TIME.
• Time can be adjusted by
pressing the Up or Down arrows.
• The default cooking time is 15 minutes.
3. Press START/PAUSE to begin cooking. The (:) will flash,
indicating your Brio is now cooking.
• To pause cooking, press START/PAUSE. The (:) will no longer
flash, indicating the unit is now paused.
• To resume cooking (unpause) press START/PAUSE once again.
Note: Opening the door will pause cooking, closing the door will resume
cooking. The light will turn on automatically when the door is open.
4. Once the Brio finishes cooking, End will be displayed and the unit
will beep three times.
• To mute/unmute the beep from the unit, press and hold down
START/PAUSE for 2 seconds.
LIGHT
Press LIGHT once to turn light on. Press again to turn off.
To change light bulb in oven, see Light Bulb Replacement under
"Cleaning and Maintenance."
WATTS
The default wattage of the Brio is
1800 watts.
1. To change the wattage,
press WATTS once. 900 will
illuminate, indicating that the
Brio is now set to 900 watts.
2. Press WATTS again and 1500
will illuminate. The Brio is now
set to 1500 watts.
3. Press WATTS once more and 1800 will illuminate, indicating the
Brio is now set to the default of 1800 watts.
14 14
instructions
360F
1800
360F
1800
Note: If the wattage is changed from 1800W to either 900W or 1500W
and the Brio is unplugged, the unit will remember the last wattage
setting when plugged back in and turned on.
DELAY
Delay function is used to delay your cooking start time.
1. Press ON/OFF. Press the up or down arrows to adjust your
temperature and time.
2. Press DELAY.
3. Press the up or down arrows
to adjust the delay time. Delay
time can be adjusted up to 24
hours (24:00).
• During delay, the (:) will
flash, indicating the delay
time countdown has started.
• Delay time can be increased or decreased by pressing up or
down arrows during the delay cycle.
4. To stop the Delay function at any time, press DELAY. The unit will
end the delay cycle and move on to the next cooking function.
• After delay time has elapsed, the unit will automatically move
on to the next cooking function.
5. Once the Brio finishes cooking your food, End will be displayed
and the unit will beep three times.
TEMP
1. Press TEMP to see or adjust
your cooking temperature.
• Temperature can be adjusted
higher or lower by pressing
the up or down arrows.
2. Press START/PAUSE
to begin cooking at
set temperature.
• Temperature can be adjusted during cooking by pressing
TEMP. Press up or down arrows to adjust temperature.
TIME
1. Press TIME to see or adjust
cooking time.
• Time can be adjusted
by pressing the up or
down arrows.
:
0 1 00
1800
360F
1800
:
00 15
1800
15 15
nuwavenow.com nuwavenow.com