Timer Settings - Klarstein VERBIER Manual De Instrucciones

EN
24
The date and time setting
1 Press "DATE TIME" button, then press the " " or " " key to select the date.
2 Press "DATE TIME" button again, then press the "+" or "-" to set the hour.
3 Press "DATE TIME" button again, then press the "+" or "-" to set the minute.
4 Press "OK" button to finish the setting.
Temperature setting
The default temperature setting is 20 °C, press "+" or "-" on the remote controller to set
the temperature, which ranges is from 15 °C to 30 °C.

TIMER SETTINGS

• There are up to 10 kinds of timer setting.
• Each setting has its date, power-on time, shutdown time and temperature setting.
• The max. time of each setting is 23 hours 50 minutes.
• The setting date for each timer can be any day or more days of a week.
• The setting date is the date of power-on time. If the shutdown time is on the second
day, it is unnecessary to set the date, you just set the shutdown time.
View the timer setting
1 Press the "TIME SET" button.
2 Press the "+" or "-" to check the power-on time by one by one.
3 For checking the shutdown time, press the " " button.
4 Press the "+" or "-" to continue viewing.
5 For deleting the current item of setting, press "C" to delete this setting.