Timer Setting - Klarstein VERBIER Manual De Instrucciones

Timer setting

(1) Select the settings
Press the "TIME SET" button, and the serial number of setting starts blinking.
Press the "+" or "-" button to change the serial number of the setting. E.g., it is showing
the setting of No. 2.
(2) Select date
Press the "TIME SET" button once again, and the cursor on the left side of date starts
blinking. Press the " " or " " keys to move the cursor to the corresponding date, press
the "+" button to add the corresponding date, or press the "-" button to delete the date
until you have completed the selection of all dates.
(3) Set the start time
1 Continue to press the "TIME SET" button, the hour starts blinking.
2 Press the "+" or "-" button to adjust the hour.
3 Continue to press the "TIME SET" button, the minute starts blinking.
4 Press the "+" or "-" button to adjust minute.
EN
25