Emerio DWC-127633 Manual De Instrucciones página 7

11. Door open icon
12. Temperature icon
13. Display screen
14. Tank mode
15. Tap mode
16. Dry mode + storage mode button
INSTALLATION
1. Inlet hose installation
1) Connect to the appliance
Insert the inlet hose elbow into the water inlet behind the appliance and tighten the screw.
2) Connect to the tap
There are three options (A, B, C) for the tap connection, but for B and C options you will need to make
a hole on or behind the cabinet so that the hose can go through the cabinet.
Note: the size of the inlet hose elbow is 3/4' with internal thread, the tap size must be 3/4' with outer
thread.
2. Drain hose installation
1) Connect to the appliance
Insert the drain hose elbow to the water outlet behind the appliance and tighten the collar.
2) Connect to the sewer
There are three options (A, B, C) for the sewer connection. For B and C options you will need to make a
hole on or behind the cabinet so that the pipe can go through the cabinet.
Fix the drain hose to avoid the wastewater flowing out to the other place.
TABLEWARE LOADING
Get rid of the large food residue on the tableware, avoiding to block the water hose. Make a reference to the
picture for tableware display and quality of the tableware. Loading the household dishwasher up to the capacity
indicated by the manufacturer will contribute to energy and water savings.
Note:
- 6 -