Automatic Fault Warnings And What To Do - HIGHONE DHP 7 A++ W701T Instrucciones De Uso

C
Useful information
PROBLEM
Lint may have built up on
Water is leaking from the the internal surfaces and
door. on the surfaces of the door
gasket.
The door may not be
The door opens by itself.
properly closed.
The water container may
be full.
The water container
warning symbol is on or
The water drain hose may
flashing.
be bent.
The lint filter may be dirty.
The seat of the filter may be
The filter cleaning warning
clogged with lint.
symbol is lit.
The surface of the lint filter
may be clogged.
The heat exchanger
The heat exchanger may be
cleaning warning symbol
dirty.
is lit.
32
REASON SOLUTION
Clean the internal surfaces
and the surfaces of the door
gasket.
Push the door until you hear
the closing click.
Empty the water tank.
If the machine is connected
directly to the water outlet,
check the water drain hose.
Clean the filter.
Clean the seat of the filter.
Wash the filter in warm
water.
Clean the heat exchanger.
EN
C
Useful information

Automatic fault warnings and what to do

Your tumble dryer has an integrated fault detection system. They are indicated by a
combination of flashing indicator lights. The most common problem codes are described
below.
Error code
3h
6h
9h
End
E03
End
3h
6h
9h
End
E04
End
3h
6h
9h
End
E05
End
3h
6h
9h
End
E06
End
3h
6h
9h
End
E07
End
33
Solution
Empty the water container, if the problem
is not resolved, contact the nearest
authorised service centre.
Contact the nearest authorised service
centre.
Contact the nearest authorised service
centre.
Contact the nearest authorised service
centre.
Contact the nearest authorised service
centre.
EN