HIGHONE DHP 7 A++ W701T Instrucciones De Uso página 5

B
Using the appliance
IMPORTANT:
The water drain pipe must be fitted at a maximum height of 80
cm.
The water drain hose must not be bent or raised between
the outlet and the machine.
Adjusting the feet
• To reduce the noise level and vibrations generated when the dryer is running, it must be stable
and balanced on its feet. Adjust the feet to ensure that the appliance is balanced.
• Rotate the feet clockwise/anticlockwise until the dryer is level and stable.
IMPORTANT:
Do not remove the adjustable feet.
Power supply connection
CAUTION:
There is a risk of a fire and electric shock.
• The tumble dryer is set to 220-240 V and 50 Hz.
• The electric cable of the dryer is fitted with a special plug. This plug must be connected to an
earthed outlet protected by a 16 amp fuse as specified on the nameplate. The rated current of
the fuse of the power supply to the socket concerned should also be 16 amps. Consult a qualified
electrician if such a socket or fuse is not available.
• Our company shall not be held liable for any damage resulting from a power supply that does
not have an earth connection.
6 EN
B
Using the appliance
IMPORTANT:
Using the appliance at low voltages will shorten its lifespan and
make it work less well.
Installation under a worktop
• When fitting the appliance under a worktop, leave a gap of at least 3 cm between the side and
rear walls of the machine, and the underside of the worktop.
• Appliances to be installed under a worktop must be assembled/disassembled by an authorised
service agent.
7 EN