Warranty Process - Ruroc ATLAS 4.0 Manual De Instrucciones

EN
WARNING!
READ THIS MANUAL BEFORE USE
If the helmet is worn in the wrong position, it
cannot provide you with full protection, in the
case of an accident this can result in serious
injury or even death.
When wearing the helmet, it should not move
freely without moving your scalp along with
it. You can check this by holding the helmet
firmly and trying to move your head within the
helmet. If the helmet moves freely when doing
so, the next size down would be required.

WARRANTY PROCESS

Before you return any product, you must go to
www.ruroc.com/returns
returns process
1. Ensure that the returned product is
washed, cleaned
shipping. Dirty
helmets will be returned unprocessed, or
may delay the process with an additional
surcharge.
2. Remember to include a note with your
name, address and phone number, AND
fill out the returns form. Please make sure
HELMET CARE /
CLEANING / STORAGE
Clean your helmet inside and outside regularly
with lukewarm mild soap/ water and a soft cloth.
Do not use aggressive detergents, solvents,
rough brush/cloth.
WARNING: Do not Paint. Do not use solvents,
detergents, thinner, petroleum based products
(e.g. gasoline), bleach, ammonia and other
cleaning agents as they may damage the
materials of the helmet. The damage may not be
visible to the user.
AT4_MAN_01-00
PLEASE DOWNLOAD & SAVE A COPY OF
THIS MANUAL FOR YOUR REFERENCE.
and follow the on-line
and dried before
and/or foul smelling
Close the buckle and tighten the chin strap so
that it feels snug under your chin. Move your
head to check that you are still able to breathe,
talk and swallow normally. Adjust straps if
necessary. Do not wear the strap over the chin,
nor use any additional chin cups or similar.
Before using the helmet do a final check by
tilting the helmet backwards and forwards. The
helmet should remain firmly in place and cannot
be taken off in any direction. If the helmet can
move freely, rotate or does give a loose fit, the
next size down would be required.
to include a short statement explaining
the warranty problem. Alternatively, you
may also return your product to the store
from where you originally purchased the
product. Any Ruroc dealer is able to handle
the warranty process on your behalf.
NOTE: Damage due to wear and tear, accident,
misuse, neglect, failure to store or use a product
other than in accordance with the instructions
provided, damage due to any repairs carried
out by you or a third party not authorised by us
is not covered under warranty. Please
our Customer Experience team
questions.
WARNING: Do not remove or modify any
components or parts. Do not make any
modifications to the chinstrap or the buckle. Do
not make any modifications to the internal shape
of the helmet or on its external shell. Do not cut or
drill any parts, nor fit any not certified accessory
to the helmet.
WARNING: Do not expose the helmet to
temperatures over 50°C (around 122°F), such as
those it may experience in direct sunlight or in
a car. Heat may damage the internal absorption
structure. Damages may not be visible to the user.
Store the helmet in a dry and dark place when not
in use.
3
contact
if you have any