Ruroc ATLAS 4.0 Manual De Instrucciones página 7

PINLOCK
Our ATLAS helmets are compatible with both anti-fogging
technology and protectint transitional insert. Please
note this item will need to be brought separately. Visit
our 'how to' guides for installation information.
Shop PINLOCK
YOUR ATLAS VISOR
To open the visor, simply place your thumb
under the thumb tab and gently pull the visor
outwards. Expect some resistance. This is
normal. You will hear and feel the visor click
through four positions until it is fully open.
When in use, please avoid covering the visor
and only make adjustments when it is safe to
do so. WARNING: Do not use tinted visors at
night. For day / track use only.
To change the visor simply twist the bayonet
screws 90˚ then remove the plastic shield at
the corner of the visor. Then put your new visor
in place and reverse those steps. Visit our
to' guides for installation information.Always
ensure your visor is clean before a journey. It is
best to use a microfiber cloth with lukewarm water.
If your visor is scratched or damaged it should be
replaced as soon as possible.
Shop ATLAS Visors
AT4_MAN_01-00
'how
VISOR ADAPTIVE
CONTROL
To adapt how tight the visor sits against the
seal, simply adjust the two screws on the
visor mechanism.
Visit our
07
'how to' guides for more information.