Osd Setting - Engel RT5130T2 Manual De Usuario

SYSTEM SETUP
Parental lock
(Some firmware versions do not support this function)
Menu Lock: When is enabled, the access to channel edition and searching
menu, will be protected by a password. Default value is Off.
Rating Lock : Set the age.
New Password : Enter new password.
Confirm Password : Confirm the new password.
Note : Default Password is 0000. There is also a Power PIN, in case of forgetting
the password that you were set. The SUPER PIN is 1006.
OSD Setting
OSD Timeout : Select the duration of displaying Info bar, from 1 to 10 seconds.
The default value is 5.
OSD Transparency : Set the OSD transparency to Off, or from 10% to 40%.
The default value is Off.
Favorite
Press OK on a Favorite Group, Now you can rename the Favorite Channels List.
Other
Antenna power: Set to ON when having an active antenna without power adap-
ter.Set to OFF when having passive antenna or active antenna with power adap-
ter. The default value is OFF.
Channel Play Type : The default value is All.
Beeper : The default value is Off.
AD Service : The default value is Off.
Use AD as default: It is activated when the AD Service is On.
AD Volume Offset : It is activated when the AD Service is On.
After Power Stop: Allows you to choose the action of the receiver at a sudden
power stop. The default value is Restart to Last Channel
45