Engel RT5130T2 Manual De Usuario página 47

MEDIA PLAYER PVR
PVR Setting
. Timeshift: The default value is OFF.
. Jump: Available options are : 30 sec, 1 min, 5 min, 10 min or 30 min.
The default value is 30sec.
· Timeshift to Record : When it is ON, it allows to record timeshift video.
The default value is ON and it is working only if the option Timeshift is ON.
Remove USB device safely: Select the connected USB drive and press OK to safely
remove the USB drive.
Timeshift
Timeshift function allows to stop and rewind TV programs due to USB drive which
is connected to the USB port of the device.
1.Make sure the USB drive is connected to the device.
2. Enter PVR Settings and turn ON Timeshift function
3. Press PAUSE button on the remote control to stop the program.
4. Control playback with the buttons on the remote control:
. Press left and right arrows to choose starting point of playback,
then confirm by pressing OK button.
. Press PAUSE to pause playback.
. Press REV and FWD to rewind or fast-forward playback.
. Press STOP to stop timeshift and continue to watch the program.
Notes:
. It is recommended to use USB drive in 2.0 standard. USB drives with low parame-
ters may not be compatible with the device.
·Large capacity USB drives may require external power supply.
Recording
1.Make sure the USB drive is connected to the device.
2. While watching a program, press REC button on the remote control to start
recording (press REC button twice to change the default recording time).
3.To stop recording, press STOP button on the remote control. Confirmation
window will appear. Select[OK] to stop recording or [NO] to continue recording.
4. Recordings are saved on the USB drive and are available in the Media Player PVR.
Note: Use Timer function or EPG to schedule a recording.
47