Safety; Intended Use Of The Machine; Prohibited Applications / Hazardous Misapplications; User Requirements - HOLZMANN MASCHINEN DSM200DS Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY

This section contains information and important notes on safe commissioning and handling of the
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as personal injury and damage to property. In
addition, observe the symbols and pictograms used on the machine as well as the
safety and hazard information!

12.1 Intended Use of the Machine

The machine is designed exclusively for tangential grinding and brushing work (= grinding or
brushing a workpiece surface with the circumference of the tool) on metals, wood and plastic.
Materials that can generate flammable or explosive dust, such as aluminium or magnesium and
their alloys, are excluded.
HOLZMANN MASCHINEN
beyond this and for any damage to property or injury resulting therefrom.
12.1.1

Technical Restrictions

The machine is intended for use under the following ambient conditions:
Rel. Humidity:
Temperature (Operation)

12.1.2 Prohibited applications / Hazardous misapplications

Operation of the machine without adequate physical and mental aptitude
Operating the machine without knowledge of the operating instructions
Use the machine outdoors, in very humid rooms or in the presence of flammable liquids or
gases.
Changes in the design of the machine
Operating the machine in a potentially explosive environment
Processing of materials that can generate flammable or explosive dust, such as aluminium
or magnesium and their alloys.
Operating the machine outside the limits specified in this manual
Remove the safety markings attached to the machine.
Modify, circumvent or disable the safety devices of the machine.
Improper use or disregard of the instructions described in this manual will result in the voiding of
all warranty and compensation claims against Holzmann Maschinen GmbH.

12.2 User Requirements

The machine is designed for operation by one person! The physical and mental aptitude as well as
knowledge and understanding of the operating instructions are prerequisites for operating the
machine.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
When operating the machine, be sure to wear appropriate personal protective equipment. Take
off rings, bracelets, watches, chains etc. before working on the machine, tie long hair together if
necessary, always wear closed, close-fitting clothing when working on the machine and always
fold long sleeves inwards only.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.

12.3 Safety Devices

The machine has an on/off switch with undervoltage release which prevents the machine from
restarting automatically after a power failure.
HOLZMANN MASCHINEN GmbH
accepts no responsibility or warranty for any other use or use
www.holzmann-maschinen.at
max. 90 %
+5° C bis +35° C
SAFETY
21
DSM200DS

Publicidad

Tabla de contenido
loading

Tabla de contenido