Lindy 38338 Manual De Usuario página 5

User Manual
Specification
HDMI 2.0b, DisplayPort 1.4, Type C DisplayPort Alternate mode, 18Gbps Compliant

HDCP 2.2/1.4 Pass-through

The following distance and resolution combinations are possible connecting the Receiver n. 38214
with high quality Cat.6 U/UTP or F/UTP cable:
70m:
1920x1080@60Hz 4:4:4 8bit

40m:
3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit

3840x2160@30Hz 4:4:4 8bit

1920x1080@60Hz 4:4:4 8bit

It can be connected also to other HDBaseT Receivers supporting up to 4K30 resolutions
ESD Protection: ± 8kV (air-gap discharge)

Human Body Model: ± 4kV (contact discharge)

Operating Temperature: 0°C - 40°C (32°F - 104°F)

Storage Temperature: -20°C - 60°C (-4°F - 140°F)

Relative Humidity: 10 - 50% RH (Non-condensing)

Metal Housing

Colour: Black

Power Requirements: AC100-240V 50/60Hz

Power Consumption: 14W

Installation and Operation
Front
1. Power LED: Indicates Power.
2. HDMI 1: Push to select HDMI 1 as input source. Push for 3 seconds to enter SINGLE mode
display window on the screen).
3. HDMI 2: Push to select HDMI 2 as input source. Push for 3 seconds to enter PIP Multiview mode
4. HDMI 3: Push to select HDMI 3 as input source. Push for 3 seconds to enter PBP Multiview mode
5. DP: Push to select DP as input source. Push for 3 seconds to enter 3xWIN Multiview mode
6. USB-C: Push to select USB-C as input source. Push for 3 seconds to enter 4xWIN Multiview mode
7. RES / WINDOW: Push to select different output resolution as shown on the screen. Push for 3 seconds
to show a yellow border on window 1, go on pushing this button to show the border on window 2, 3 or
4. Then push one input button to display that input on the current selected window
English
(one