Lindy 38338 Manual De Usuario página 8

User Manual
The following commands are used for input selection or querying input information and can only be valid
on SINGLE mode.
Command
SET IN SOURCE x
GET IN SOURCE
GET IN RESOLUTION
The following commands are used to select the output resolution:
Command
SET OUT RESOLUTION x
GET OUT RESOLUTION
The following commands are used to select the HDMI Output HDCP modes:
Command
SET OUT HDCP x
GET OUT HDCP
Details
x is one of the following entries: HDMI1, HDMI2, HDMI3, DP, USB-C
Example:
Send: SET IN SOURCE HDMI1
Receive: IN SOURCE HDMI1
Get the current source selection.
Example:
Send: GET IN SOURCE
Receive: IN SOURCE HDMI1
Get the current source resolution.
Example:
Send: GET IN RESOLUTION
Receive: IN RESOLUTION 1920x1080p60
Details
x is one of the following resolutions:
4096x2160p60, 4096x2160p50,
3840x2160p60, 3840x2160p50,
3840x2160p30, 3840x2160p25,
1920x1200p60RB, 1920x1080p60,
1920x1080p50, 1360x768p60,
1280x800p60, 1280x720p60,
1280x720p50, 1024x768p60
Default: 3840x2160p60
Example:
Send: SET OUT RESOLUTION 3840x2160p60
Receive: OUT RESOLUTION 3840x2160p60
Get the current output resolution.
Example:
Send: GET OUT RESOLUTION
Receive: OUT RESOLUTION 3840x2160p60
Details
x is one of the following: FORCE-1.4 (default), FORCE-2.2, FORCE-SINK.
Example:
Send: SET OUT HDCP FORCE-1.4
Receive: OUT HDCP FORCE-1.4
Get the current output HDCP mode.
Example:
Send: GET OUT HDCP
Receive: OUT HDCP FORCE-1.4
English