Routine Maintenance - Uline TORNADO H-10166 Manual De Instrucciones

Ocultar thumbs Ver también para TORNADO H-10166:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ROUTINE MAINTENANCE

For maximum performance, check and maintain
vacuum parts regularly.
WARNING! To avoid electrical shock or
injury from moving parts, always turn off the
power switch and unplug the power source
plug before performing maintenance or
troubleshooting.
IMPORTANT! Always unplug by grasping the
power source plug. Never pull on the power
cord to unplug.
NOTE: Vacuuming new carpet or vacuuming
fine powders may clog the dust bag. Check
dust bag often.
REPLACING THE DUST BAG
IMPORTANT! Check dust bag weekly. Replace
dust bag when it is near full or when cleaning
suction diminishes. Never reuse a dust bag.
1.
Unplug vacuum by grasping and pulling on the
power source plug.
2. Unzip cloth bag. Unlock collar retainer by pressing
on the two tabs and pulling the top toward user.
Dispose of used dust bag. (See Figure 9)
Figure 9
Collar Retainer
PAGE 4 OF 24
MAINTENANCE
3. Slide collar of new dust bag completely into collar
retainer. (See Figure 10)
Figure 10
4. Push collar retainer
back into position
and secure in place.
(See Figure 11)
5. Tuck the remainder
of the dust bag
completely inside
the cloth bag.
Ensure it lays flat,
top to bottom,
without bunching.
Zip cloth bag.
Figure 11
1022 IH-10166

Publicidad

Tabla de contenido
loading

Tabla de contenido