FujiFilm Sonosite Guia Del Usuario página 4

Asia and Pacific
Other regions
Fax
Email
Web
Printed in the U.S.
Attaching and removing the mini-dock
WARNING
To avoid the risk of electrical shock to the patient, do not touch the ungrounded
connectors on the back of the mini-dock while simultaneously touching a patient.
CAUTION
• To avoid damaging the mini-dock, do not perform high current grounding impedance
testing involving this part. Accessible metal of the mini-dock is not protectively
earthed.
• To avoid damaging equipment, remove mini-dock from system prior to transporting.
1. Ensure that the ultrasound system is turned off.
Connecting the system and mini-dock while the power is on may cause the mini-dock to function
improperly.
2. Slide the mini-dock feet under the ultrasound system, and firmly press the mini-dock into the system
connector. The mini-dock is correctly attached when no gap is between the system and mini-dock.
NOTE
If at any time the ultrasound system loses connectivity, turn off the system
and reattach the mini-dock and system. Always verify that the mini-dock and
system are correctly attached after changing a transducer. When you change a
transducer, the mini-dock may loosen.
Sonosite Mini-Dock User Guide
German support: +49 69 8088 4030
Italian support: +39 02 9475 3655
Spanish support: +34 91 123 8451
+61 2 9938 8700
+1 425-951-1330 or call your local representative
+1 425-951-6700
General: ffss-service@fujifilm.com
United Kingdom: uk-service@fujifilm.com
Europe, Middle East, and Africa:
Asia and Pacific: ffss-apacme-service@fujifilm.com
www.sonosite.com
eraf-service@fujfilm.com
2