Included Parts - MAXSA 40227 Instrucciones De Montaje Y Funcionamiento

Carefully remove and identify all the parts from their protective packaging and lay them
out in front of you.

INCLUDED PARTS:

4 screws and anchors for
mounting solar panel
15 foot power cable
Solar panel
LUX
Once you have identified all parts, connect the solar panel to your Solar Flood Light by
plugging the 15 foot cord into the cord attached to
the bottom of the Solar Flood Light. Turn and twist
the cords while pressing firmly together until they
are attached tightly.
Adjustment dials are located behind the motion
sensor. The dials may be rotated to the front
for ease of adjustment. After adjustments are
completed, the adjustment dials should be rotated back to face the wall and have the
arrow on the bottom facing the front.
2
Lens
Motion sensor
SENS
TIME
Duration adjustment knob
Motion sensitivity adjustment knob
Light sensitivity adjustment knob
Solar panel
angle pivot
2 mounting screws
(for main body)
Solar panel
mounting bracket
ON / OFF switch
Main battery unit
Metal housing screw