Remote Control - Akiyama CDS.MP400S Manual De Usuario

REMOTE CONTROL

Plug remote connector of CDS-MP400S Player at A (left side) of the Mixer remoter Fader
Start. PlugAudio RCAoutput of CDS-MP400S Player to the Mixer channel selected toA.
- Mode Cue/Play . When selected, at Display it will appear (CUE/PLAY)
Every time you raise Crossfader from B side to A side the ACU-4 Player will start Playback
and when you slide the Crossfader to B side player will enter Pause mode.
1
Starts Playback
A B
XFADER
- . When selected at Display it will appear (TACT)
ModeTact
If your CDS-MP400S is playing, advance it to B. A is not affected. When advancing back to
A, CDS-MP400S is paused. The same action do it again. To B and back to A. The pause
status is becoming to play. You will see that every time you touch A. It will play, pause, play,
pause.......If we haveACU-4 in Playback mode:
1
Enters Pause
A B
XFADER
- Mode Lock . When selected at Display it will appear (LOCK)
Every time you close the fader to A (slide from B to A), it will cause a short play of the music
and immediately pause. It sounds like the Scratch skill, Chopping. All these function you
can connect a player with TACK/LOCK to B. Interesting feature to perform strange mix
effect like beat juggling.
A B
XFADER
FOLDER/TRACK
Press this button to switch between MP3 Folder and MP3 File.
- When under MP3 File mode, Total-Track shows the total MP3 files in the folder.
You can scroll the different Folders.
PERFORMING FUNCTIONS
2
Enters Pause
A
XFADER
2
Starts Playback
A
XFADER
Every sharp move from B to A will allow for a
short play of the music and immediately pause.
- When under MP3 Folder mode, Total-Track shows the total folders in this CD. You
can scroll the different Tracks.
EFFECTS PARAMETER
Once you select and effect (it will show at Display) you can change the Parameter by turning
the wheel. The value of the effect parameter will appear at Display.
1- Select i.e. Flanger >At Display you read FG 200 > 200 is the parameter current value.
2- Move the wheel to change parameter. The Display will show new parameter value.
- Flanger parameter ranges from 0 to 800.
- Echo parameter ranges from 0 to 800.
- Filter parameter ranges from -60 to +60.
B
WHEELFUNCTIONS
The Wheel has many functions:
- Pitch bend: In Playback mode use it to fine tune the Playback to synchronise two tracks.
- Quick Search: Select first SEARCH, spin the wheel and you will advance or reverse the
track fast.
- Effects Parameter.
- Quick Search (Folder/Track): Select first FOLDER, at Display shows F SEL. Press " / "
and turn the Wheel for quick search of Folders. Press FOLDER again to enter the track at the
Folder (Display shows the name of first track). Press "
search of Tracks.
- Fine tunning a Loop: while at Loop Edit Mode display shows B-EDIT. Move the Wheel to
lengthen or shorting the Loop.
B
/ " and turn the Wheel for quick
5