DeLOCK 89837 Manual Del Usuario página 3

English
Hardware Installation
1.
First, install the M.2 SSDs onto the PCI Express card.
2. Turn off your PC and unplug the power cord.
3. Open the housing.
4. Remove the slot holder from the available PCI Express slot.
5.
Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
6.
Use a screw to attach the card to the housing.
7. Reattach the housing and connect the power cord to the AC adapter.
8. Switch on your computer.
Driver Installation
1.
Switch on your computer.
2. The drive will be recognized and you can start using the device immediately.
Note
The card requires the PCIe bifurcation of the motherboard to split the PCIe signal
in order to use multiple slots with M.2 SSDs.
Without PCIe bifurcation only the first M.2 slot of the card can be used.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 09/2022
-3-