ENGLISH
Technical Data
Cordless planer
Art. No
Battery voltage
No-load speed
Planing width
Planing depth
Safety class
Weight without battery (Net/gross)
Noise details
Sound pressure level L
pA
Measured sound power level
Measured according to EN 62841; Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 62841
Vibration emission value a
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may
increase above the level given in this information sheet. The vibration emission level may be used to compare one
tool with another. It may be used for a preliminary assessment of exposure. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional
safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING
The noise emission level given in this information sheet has been measured in accordance with a standardized test
given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure.
The declared noise emission level represents the main applications of the tool. However if the tool is used for diffe-
rent applications, with different accessories or poorly maintained, noise emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to noise should also take into account the times when the tool is switched off
or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise such as: maintain the tool and
the accessories and organization of work patterns.
Exposure to noise can cause hearing loss.
Read and understand the operating
instructions before using the
appliance. Familiarise with the control
elements and how to use the appliance properly. Obser-
ve all the safety measures listed in the instructions.
Behave responsibly towards other people. The operator
is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appli-
ance. An exception includes youngsters trained in order
to reach knowledge under supervision of the trainer
during occupational education.
In case of any doubts about connection and operation
refer please to our customer center
Save all warnings and instructions for future refe-
rence.
16
L
WA
h
Specified Conditions of Use
The plane can plane surfaces and rabetts, and bevel
and chamfer edges. The power tool is powered by
rechargeable batteries and is therefore independent of
a mains connection.
Do not use this product in any other way as stated for
normal use.
Not observing general regulations in force and instruc-
tions from this manual does not make the manufacturer
liable for damages.
HO 18-0
58465
18 V
14000 min
-1
82 mm
0 - 1,5 mm
III
2,63 / 3,18 kg
95,2 dB (A)
106,2 dB (A)
10,16 m/s
2