Quick Start Guide - SPORTSTECH MGUN300 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
FULLY CHARGE THE BATTERY
1
Charge the battery fully (up to 3 hours) before
using the MGUN300 for the first time.
Connect the charging cable to the charging port
at the bottom of the battery / handle.
Plug the charging cable into a suitable socket.
ASSEMBLE THE DEVICE
2
After the battery is fully charged, remove the charging
cable.
Insert the battery / handle firmly into the power area of
the MGUN300. You notice a click.
Pay attention to the correct insertion position, which
you can recognize by the contacts and the shape of
the connector.
To remove the battery, press the button (red) on the
main body. Losing weight may feel stiff. This is NOT a
defect, but serves the optimal connection between the
battery and the main body.
ATTACH THE MASSAGE DEVICE
3
Make sure the device is fully charged and turned off.
Select the desired massage attachment.
Push the attachment - without force - into the device and turn it to secure it.
EXCEPTION: When choosing the U massage head, make sure that the slightly raised notch on the attach-
ment is aligned with the groove on the device opening and do not turn the massage head!
Attachments and speeds are explained below.

QUICK START GUIDE

25 25
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido