Danger Of Electric Shock - EASYHOME 1058-2022-WT Manual Del Usuario

− To charge, connect the USB charging cable to a USB power adapter
(SELV, 5 V, max. 1 A - not included in delivery).
− Plug the USB power adapter into the power outlet.
− The LED will light up red while the product is charging.
− The charging time is about 3 - 4 hours.
− As soon as the battery is fully charged, the LED light switches off.
− Unplug the USB power adapter from the power outlet and disconnect
the USB charging cable.
Filling in water
WARNING!

Danger of electric shock!

− If the product tips over while the water container is full, the leaking water may run
into other pieces of electrical equipment and cause an electric shock.
− Empty and thoroughly dry the water container when the product will not be used for
a longer period of time.
− Make sure the product is not connected to the power supply via the USB cable before
filling in water.
1. Turn the control unit
(see Fig. B).
2. Fill a maximum of 320 ml of water into the water container
panel allows you to check the water level (see Fig. C).
3
3. Place the control unit
clockwise (see Fig. E).
clockwise and lift off from the water container
1
back onto the water container and turn counter-
2
Operation
2
. The transparent
2
13