Switching The Product On/Off; Filling Up Water; Stop Humidifying - EASYHOME 1058-2022-WT Manual Del Usuario

Operation

Switching the product on/off

The product has a color-changing LED with 7 colors, which can be selected via the
color changing button
1. Switch on the product with the power button
The water container
on. If the water container is empty, the LEDs will light up in red and the product
will switch itself off.
2. The product is switched on when mist is evaporated from the mist outlet
opening and the LEDs light up and change colors.
13
3. Press the color changing button
4. Press the mist size button
- You can select between high or low intensity of mist.
- Low intensity of mist is the default setting.

Filling up water

NOTICE!
When the sensor
the integrated safety mechanism will automatically stop the
evaporation process. The LEDs will light up in red and no mist will
be produced from the mist outlet
off.
1. To start using the product again, disconnect from the power supply when
using with the USB charging cable. Then fill the water container
(see section "Filling in water").
2. Now, switch on the product (see section "Switching the product on/off").

Stop humidifying

1. Press the power button
14
.
5
must be filled with water for the product to be switched
2
to switch between the different colors.
5
to adjust the intensity of the mist (see Fig. A).
6
is not in contact with water anymore,
10
in order to switch on the product.
4
.
4
. The product will switch itself
13
with water
2