AMC VOXOUT Manual Para El Instalador página 4

PROGRAMMING MENU FROM KEYBOARD - 2
OUTPUT
MENU
USER CODE
MENU
CONTACT ID
MENU
www.amcelettronica.com
[ 01 ] Line 01
Function
Associate Telephones
Pulse duration
User types
Program Codes
Idc Event
Idc Numbers
System ID
Max attempts [ 3 ]
Answ. Wait [15 ]
Tone width [3 ]
Associate telephones
H - - - -
L1 O / tel 12345678
[ 01 ] Line 01
Sec. 15
[ 01 ] User Nr 01
M
CODE: User Nr xx
111111 (default UT01)
Reset Calls
999999 (default)
SIM Code
0000 (default)
Tel 12345678
Prog ●●●●●●●●
INPUT 1
Code IDC [ 130 ]
TEL NUMBER from 01 to 08
es. 031123456
Tel. 01/ ID CODE
1234
C01 /Tel 12345678
* - PLAY ●●●●●●●●
4
Enter (✔) = to change
Rh arrow to change output
Up arrow to choose function
- = not programmed
A = Is enabled with input associated with RES
closed low
H = Is enabled with associated input (always, also
with RES open)
T = Tamper alarm
U = Associated to a user code (local and remote)
P = Can be piloted from remote without user code
G = gsm problem (no GSM for 60'')
I = Input in standby
C = Low credit
R = ring
This parameter allows the user to enable/disable the
outputs by sending out a ring from a programmed
remote telephone. If the output duration is 0, output is
stable, therefore enable/disable step by step. If other
than 0, it becomes a pulse output.
IMPORTANT: always type in the telephone number
with the international country code (+39 for Italy).
The output must have function P
M = Master (key 6)
1 - 5 = User enabled only to enable/disable the
associated output (the output must have function U)
Program the desired number for the manual
reset of the call que (it is sufficient to insert even
just one digit).
□
Program with the numbers enabled to the
operations on the dialer.
Warning: to ensure proper operation, the
telephone numbers in the phone book must
always be preceded by +39
L1–L5= Input à130
Tamper line 01- 05 à137
Life Test à602
GSM OFF 1 min à 351
Card Tamper à 137
C01=LINE 1
C02=LINE 2
C03=LINE 3
C04=LINE 4
C05=LINE 5
C06=TAMPER LINE 1
C07=TAMPER LINE 2
C08=TAMPER LINE 3
C09=TAMPER LINE 4
C10=TAMPER LINE 5
C11=Life Test
C12=GSM OFF 1 min
C13= Board Tamper
VOXOUT v. 1.2