Burkert 1087 Manual De Instrucciones página 11

SAFETY AND PROPER USEAGE
To ensure safe and enduring performance of this product, you must comply strictly with the instructions enclosed herein.
- Read the operating instructions carefully and follow the safety instructions in particular, and also observe the operating conditions.
- Operating instructions must be available to each user.
- The liability and warranty for the device are void if the operating instructions are not followed.
INTENDED USE
This timer is used for time-controlled switching of connected devices. Use the device only as intended and ensure proper storage, transport, installation and
operation.
SAFETY AND WARNING INSTRUCTIONS
Observe valid and generally accepted safety rules when planning, installing and using this product.
-
Take proper measures to prevent unintentional operation of the product or damage to it.
-
To protect against injuries:
Secure this device against unintentional operation.
-
Do not use this device in potentially explosive areas.
-
Do not make any internal or external changes on this device.
-
Only trained specialist personnel may carry out installation and maintenance work.
-
Comply with the general rules of technical installations.
-
These safety instructions do not make allowance for
any contingencies and events which may arise during installation, operation and maintenance.
-
location-related safety regulations.
-
It is important that personnel use safe working practices and observe all regulations and legal requirements for safety when operating this product.
When handling, operating or carrying out maintenance on this product, personnel must employ safe engineering practices and observe all local
health & safety requirements & regulations. International users refer to regulations that prevail within the country of installation. Most accidents,
which occur during the operation and maintenance of machinery, are the result of failure to observe basic safety rules or precautions. An accident
can often be avoided by recognising a situation that is potentially dangerous. Improper operation or maintenance of this product could be
dangerous and result in an accident causing injury or death. The manufacturer cannot anticipate every possible circumstance, which may represent
a potential hazard. The WARNINGS in this manual cover the most common potential hazards and are therefore not all-inclusive. If the user employs
an operating procedure, an item of equipment or a method of working which is not specifically recommended by the manufacturer he must ensure
that the product will not be damaged or made unsafe and that there is no risk to persons or property.
11
ENGLISH