Prestigio ROADRUNNER 470GPS Guia De Inicio Rapido página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
PCDVRR470GPS
Updating the firmware
Follow the steps below to update the video recorder firmware:
1. Download the current firmware file from the device page on prestigio.com.
2. Save the file to the microSD card using the memory card reader (included).
Note. It is recommended to use a formatted microSD card.
3. With the video recorder powered off, insert the microSD card in the direction shown on the device's body until you hear it click into place.
The firmware update will start automatically once power is supplied to the device and the microSDcard is initialized.
You can also update the firmware using the app on your mobile device.
WARNING! The update process may take some time. Do not unplug the device from the power source or turn off the vehicle's ignition until the update process is
complete.
Safe use guidelines
Locate the device in the passenger compartment so as not to obstruct the driver's view or prevent airbags from deploying. Do not be distracted by the display of
the radar detector while driving to avoid an accident. To prevent fire or electric shock, do not expose the device to rain or moisture. Do not expose the device to
fire. Do not allow the device to come into contact with sources of strong electromagnetic radiation. To charge the device from the cigarette lighter of a car, use only
the original power adapter included in the package. The manufacturer shall not be liable for any consequences, direct or indirect, arising from the use of the vehicle
power adapter for purposes other than its intended use or for powering or recharging an instrument not included in the scope of delivery.
Your device may only be repaired by Prestigio specialized service centres.
Troubleshooting
WARNING! Disconnect the device from the power supply immediately if it is not working properly. Do not try to repair the device yourself, it may cause damage.
1. The device does not turn on. Check that the device is connected to a power source.
2. The video file is not being recorded. The memory card is full of files that are protected from being overwritten or deleted. Delete unnecessary files via the
recordings menu or format the memory card (read open sources on how to do this).
3. Video recordings are not viewable. The card is faulty. The speed or capacity of the memory card does not meet the minimum requirements of the video recorder.
Use a microSD card (SDHC/SDXC) with a read/write speed of at least 10 MB/s of up to 128 GB (class 10 or higher recommended).
4. During video playback the following message appears: "File Error". The microSD card is faulty. Delete the playback video file because it was damaged during
recording. If none of the recorded files play, format the microSD card and check it for damaged sectors (read open sources).
5. The resulting image is fuzzy. Check the cleanliness of the camera lens. If the lens is dirty, clean it. Make sure that the maximum video recording resolution is set in the settings.
6. GPS does not work correctly. There may be an interference with the device. GPS may not work correctly in enclosed spaces such as tunnels and rooms. In cars
with metallized windshield coating, there may be problems with GPS module operation and its disorientation.
7. The device does not respond to the control buttons. The operating system of the video recorder does not work properly. Restart the device. If the operation of
the device is not restored, contact a specialized service centre.
Note. All information contained herein is subject to change without prior notification of the User. Up-to-date information and a detailed description of the device,
as well as connection instructions, certificates, information about companies that accept quality claims and warranties, are available for download at
prestigio.com/use. All trademarks and brand names are the property of their respective owners. Information about the manufacturer and suppliers can be found on
the packaging. Manufacturer: Prestigio Plaza Ltd, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus, prestigio.com. Made in China.
© Prestigio Plaza Limited
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pcdvrr470gps

Tabla de contenido