Technical Data
Eccentric sander
Art. No
Service connection
Rated input
No-load speed
Orbital travel diameter
Dimensions of grinding plate
Net/gross weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Measured according to EN 62841;
Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Vibration emission value a
Uncertainty K =1,5 m/s
2
Wear ear protectors!
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another. It may be used for a preliminary
assessment of exposure.
An estimation of the level of exposure to noise should
also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period. Identify additional safety
measures to protect the operator from the effects of
noise such as: maintain the tool and the accessories and
organization of work patterns.
WARNING
The noise emission level given in this information sheet
has been measured in accordance with a standardized
test given in EN 62841 and may be used to compare one
tool with another. It may be used for a preliminary assess-
ment of exposure.
The declared noise emission level represents the main
applications of the tool. However if the tool is used
for different applications, with different accessories or
poorly maintained, noise emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to noise should
EXS 125.1
58229
230 V ~ 50 Hz
360 W
6000-12000 min
2 mm
ø 125 mm
1,65 / 1,75 kg
80,2 dB(A)
91,2 dB(A)
4,387 m/s²
h
also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the
operator from the effects of noise such as: maintain
the tool and the accessories and organization of work
patterns.
-1
Exposure to noise can cause hearing loss.
Read and understand the operating
instructions before using the
appliance.
Familiarise with the control elements
and how to use the appliance properly. Abide by all the
safety measures stated in the service manual. Act
responsibly toward third parties. The operator is
responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision of the
trainer during occupational education.
In case of any doubts about connection and operation
refer please to our customer center
Save all warnings and instructions for future
reference.
Specified Conditions of Use
The sander can be used for sanding wood, plastics and
metal. This machine is suitable only for dry sanding.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
ENGLISH
11