Prestigio ROADRUNNER 480W Guia De Inicio Rapido página 13

PCDVRR480W
Note. The device's microSD card stores videos of the selected duration, sorted by date. When the memory on the card runs out, the device automatically deletes
the oldest video file and then records a new one.
Setting the video recorder modes
Follow the steps below to switch to the video recorder mode settings:
1. Tap the video recorder screen anywhere and press
2. Press and select the mode you want to adjust:
 Adjust video recording settings: time and date stamp, etc.
 Video recorder settings: recording cycle, software version, G-sensor, etc.
3. Make the changes and activate them by pressing
4. Press > to return to video recording. The recording will continue automatically.
Locking a video file from being overwritten or deleted
To block the current video file from being overwritten or deleted, press
If the acceleration sensor (G-sensor) is triggered, the blocking will be done automatically.
Video files viewing
You can view video recordings on the PCDVRR480W device itself (with external power on).
It is also possible to view on a PC with codecs installed to play TS format files encoded in H.265. To do this, remove the memory card from the video recorder and
connect it to a PC using the memory card reader (included).
Connecting the device to the app
The app allows you to view and save video files on your mobile device, update the firmware, and access the video recorder settings control. Scan the QR code on
the device box to find the app link in the App Store and Google Play. For a detailed description of how to connect to the app and its features, please refer to the
full user manual, which is also available on the website.
Updating the firmware
Follow the steps below to update the video recorder firmware:
1. Download the current firmware file from the device page on prestigio.com.
2. Save the file to the microSD card using the memory card reader (included).
Note. It is recommended to use a formatted microSD card.
3. With the video recorder powered off, insert the microSD card in the direction shown on the device's body until you hear it click into place.
The firmware update will start automatically once power is supplied to the device and the microSDcard is initialized.
WARNING! The update process may take some time. Do not unplug the device from the power source or turn off the vehicle's ignition until the update process is
complete.
© Prestigio Plaza Limited
.
.
in Record mode. The lock indicator will appear in the upper right corner of the screen.
13